Stormsure Inflatables Repair KitStormsure
Stormsure Inflatables Repair Kit for bounce house, beach balls, inflatable kiddie pools, pool toys, etc.
Stormsure’s repair kits are all-in-one packs containing carefully selected contents that enable you to easily make reliable and long-lasting repairs to the respective type of item or piece of equipment.
1 x Tube Stormsure flexible adhesive 5g
1 x TUFF Tape 15cm repair strip
2 x TUFF Tape 75mm repair patches
1 x Pair of protective gloves
For instant repairs to punctures and splits on generally flat surfaces, clean the surface and apply a TUFF Tape patch or strip directly onto the damage. Rub with a smooth, hard object to ensure best adhesion and least air under the patch.
For damage in awkward or hard to reach areas, clean the damaged are (sand for best results) and apply Stormsure Flexible Repair Adhesive directly onto the damage, leaving a 5mm excess overlapping around it. Leave flat and allow to cure for 10-12 hours.
Mix with Stormcure Accelerator to reduce cure time to approximately 1 hour. Ensure there is no air left in the tube before replacing cap. Store partly used tubes in a freezer.