Ozone Wasp Wing - four sizes available
2020 Ozone Wasp Wing. Available in 3m, 4m, 5m, and 6m sizes.
The WASP is a Kite Wing that crosses easily from water, land or snow. It offers easy power for anything that rolls, slides, planes or glides. Use it with your Skateboard, Mountain Board, Skis Snowboard, SUP, Windsurf or Foil board. Simple, quick and a whole load of fun!
We concentrated on making the WASP easy to fly and handle. The large size Leading Edge creates stability and reduces flex, it also helps develop power at low speeds to get you moving sooner. The enlarged strut provides direct angle of attack control, as flex is minimal offering a solid and controlled feeling.
- Power Handles
Multiple Power Handles on the Leading Edge and Strut have been positioned to cover many options, providing maximum control and comfort while riding
- De-power Handle
The streamline De-Power Handle at the front of the Leading Edge completely de-powers the wing for total control when carving downwind in swell or when carrying the wing.
- Direct Connect Strut
Our Direct Connect construction method improves load distribution between the Leading Edge, Strut and Canopy. This construction method ensures clean profiles are maintained with the optimum canopy tension. The Strut is connected directly to the Leading Edge with internal and external reinforcements.
- Wrist Leash
The comfortable wrist leash attaches to you and the Leading Edge of the wing. If you become overpowered or lose control, let go of the wing and it will de-power on the wrist leash line
- Internal reinforcements
What’s on the inside counts too – internal reinforcements for improved strength and durability; such as a Double layered Dacron + Insignia taped Leading Edge closing seam with high strength threads.
- Double Stitched Folded Seams
Sail canopy seams are stitched, folded, and then stitched again for a clean and strong connection of the panels.
- Reinforced Trailing Edge
Double layer Teijin D2 Trailing Edge strip with an internal light weight Dyneema reinforcement – this reduces canopy wear and helps to maintain optimum Trailing Edge tension as designed. The Dyneema line also reduces any potential stretch at the Trailing Edge.
- Low Profile Aerodynamic Scuff Pads
Leading Edge bumpers are often large and unnecessary cosmetic items. At Ozone we build our kites and wings for performance and durability using the best materials & components available. Any areas requiring scuff protection we use a lightweight durable material with superior abrasion resistance, while keeping a low profile in order to reduce drag and maintain performance.
- Unique bladder construction
Our bladders are constructed in-house with advanced custom built welding machines. Double layered sections are applied to any potential wear areas
- One-Pump Inflation System
The One Pump inflation system enables quick and easy setup with single point inflation of the wing. Note: there is no closure clip on the one pump hose as the wing should be packed in case of Leading Edge or Strut deflation
- High volume inflate/deflate valve
A high volume valve makes inflation and deflation quick and easy. Pumping is a breeze thanks to the high airflow rate, while the internal seal engages to stop any air coming out under pressure. Unscrew the bottom of the valve to deflate and pack with ease.
- Wrist Leash
WIND RANGE WATER
WIND RANGE LAND
We invite you to view a video with Ozone Product Manager and Test Rider Torrin Bright providing his insight and tips to help you choose the correct size WASP wing.
Ozone WASP V1 ...We invite you to view a video with Ozone Product Manager and T...
Learn To Wing ...In this video we guide you through the steps to set up the WAS...