2020 Ocean Rodeo Roam Kite
2020 Ocean Rodeo Roam Surf and Hydrofoil Kiteboarding & Kitesurfing Kite
FREERIDE FOIL BOARD / SURF
Using a carefully selected mix of Dacron and ripstop, we have created a super light yet rugged 3-strut air frame.
Although the Roam’s design remains familiar in Gen 3, the kite’s flying weight has been greatly reduced (weighing-in lighter than most single strut kites), improving its performance not just in light wind, but in all wind conditions.
The ultra light weight and deep foil profile in combination with a moderate arc provide for sharp, responsive turns, maximum drift, and the low-end hover sought out when freeride foiling, or drifting down-the-line on your surfboard.
With the Roam Gen 3, there is no longer a need to compromise on stability and wind range in favour of no struts.
Sizes 5, 6, 7, 8, 9, 10, 12
- BIG AIR20%20%
- LIGHT WIND70%70%
- HIGH WIND80%80%
- STRAPLESS FS60%60%
Built for the dedicated wave rider with a moderate arc makes the roam a fast turning kite combined with a large sheeting range.
The Roam’s low aspect ratio design and deep foil profile allow for maximum drift and low end power.
3 STRUT FRAME
The Roam’s 3 strut “boxy” frame results in its big lifting wingtips allowing the kite to effortlessly drift down the line while maintaining positive steering with tight pivot turns for ultra fast changes of direction.
The entire frame is built with tested and proven KP-E dacron providing incredible strength, durability, and rigidity. Where our competition choose to reinforce their closing seams with only mark cloth, we use more KP-E because we believe reinforcement materials should be at least as strong as its base.
A fixed short line bridle with a floating V design and a two pulley system creates direct and snappy response while also keeping bar pressure low. New to this generation are larks head loops on front bridles, and knots on the back lines making for an innovative system that stabilizes the leading edge. This allows the Roam to lift out of a loop and avoiding a stall for maximum climb.
A single front line flag out systemin is used allowing the rider to achieve maximum de-power if the trim loop release is activated..
WARNING! It is crucial that the bar you are using utilizes this system.
Note: For Next Gen kites we have changed the bridles on our kites so that the front attachments have loops and the back attachments have knots.
In order to use a previous generation Ocean Rodeo bar with a Next Gen kite, you must first install the OR Bar Bridle Adapter Kit (which can be purchased from a dealer or directly from Ocean Rodeo) to the bridles on the kite. This will change the bridles so that the front attachments have knots and the back attachments have loops. Thus making it compatible with the older model bars. Click here for more information.
DIMENSION POLYANT K-PE DACRON
Dimension Polyant’s K-PE dacron utilizes PEN (polyethylene naphthalate) fibers in the warp direction. PEN has a higher modulus than polyester and these fabrics exhibit approximately 30 to 40% lower stretch than their polyester equivalents. This makes K-PE the ideal choice for kite dacron where low stretch is a top priority.
K-PE fabrics are produced utilizing DP’s patented X-PLY® technique assuring reliable performance and the highest quality lamination available on the market.
TEIJIN TECHNO FORCE D2 RIPSTOP
Designed specifically for the kiteboarding market, Teijin’s Technoforce D2 Ripstop has high tear resistance, low stretch, and is incredibly light weight.
Each Strand of yarn is individually coated before being woven together. A second surface coating is then applied to the material, providing long term endurance.
Teijin D2 is the benchmark in quality with proven superiority in durability and dynamics.
PRECISION CURVE STRUTS
New Curved struts hold the designed foil shape delivering the desired performance through the wind range.
TAPERED STRUTS AND LEADING EDGE
Designed to offer the most aerodynamic air frame, we’ve tapered the ends of both the leading edge and struts to deliver the ultimate in drag reduction.
ARMORTEX® ABRASION GUARD
Ultra-light, non fraying, and abrasion resistant, these Kevlar/ nylon blend scuff protection pads deliver a streamlined no snag profile throughout the kite.
ULTRA LITE CONSTRUCTION
We use a blend of state of the art fabrics and components in order to bring to you the lightest and toughest kites we’ve ever made. Using custom blended UV film in our strut and leading edge bladders allows us to double down on light weight with outstanding durability.
SPEED INFLATION SYSTEM
Every aspect of our Speed Inflation system has been fine tuned over the years to be low profile, reduce drag, and above all to ensure that you spends less time on the beach and more time on the water.
Featuring all new EVA Clamp covers. See if your clip is open or shut. Light and easy to operate.
VARIABLE LINE LENGTH
Tailor your kite’s performance to match your riding style and launch conditions. Longer lines generate more power while shorter lines increase speed and response. Ultra-short lines provide immediate rider feedback to the kite and a direct, snappy feel with added advantage of simplified line management at tricky launching and landing sites.
HIGH CAPACITY VALVE
Direct hose to valve connection for simple operation. Wide threaded cap is easy to tighten and even easier to unscrew eliminating the jammed valve cap syndrome. Cap is leashed to the kite, and the valve cover has be been re-shaped for smooth no snag fit.
15 years of kite design and manufacturing has taught us more than a few tricks about using strategic seam placement to reduce the stress points between the trailing edge and the canopy. This combined with load distributing reinforcement patches enhance the kite’s performance and durability.
EASY ACCESS BLADDER PORT
The Leading Edge access port has been redesigned. The zip entry access to bladders is neatly finished delivering a super clean entry into the leading edge compartment.
Keeps line lengths equal when fine tuning kite turning speed.
This three stage zig-zag stitch, combined with 10mm tape, distributes the seam load and creates a tear resistant, long lasting seam.
SHERPA TECH BAG
The Sherpa Kite Bag comes standard with all 2019 kites.
We’ve all been there, draping multiple kite bags, pumps and boards over every appendage of our bodies. Fumbling our way through rugged terrain in search of that perfect wave or glassy flat.
The Sherpa system makes it easy to connect and stack an unlimited numbers of kite bags off your back or chest for a perfectly balanced hike in and out.
Free up your hands and arms for effortless climbing. In seconds, stash your board and pump away. Designed for riders who search for the ultimate ride, it’s never been easier to find out what’s around the next headland.
WIND CHART COLOUR MATCHED LABLES.
To make things even easier the Sherpa kite bag is color coded via strategically placed color coded size labels. Aligned to match wind strength colors used by leading web based wind forecast websites, with a quick glance you’ll know if you’re grabbing a 17m or 9.5 m.
TWINTIP ~ 75KG / 180LB RIDER